Makita UB001C Instruction Manual page 6

Installing the end nozzle
Align the triangle mark on the end nozzle with the trian-
gle mark on the front pipe, then attach the end nozzle
to the front pipe, and then turn the end nozzle to lock it
into place.
Install the end nozzle so that the tip of the nozzle faces
downward. Depending on the working environment, you
can install the end nozzle so that the tip of the nozzle is
facing up.
1
2
► 1. Triangle mark 2. End nozzle 3. Front pipe
To remove the end nozzle, perform the installation
procedure in reverse.
NOTE: The length of the nozzle can be changed by
moving the nozzle as shown in the figure.
1
► 1. End nozzle 2. Front pipe
Installing the flat nozzle or
extension nozzle
Optional accessory
1.
trusion on the front pipe, then attach the adapter pipe to
the front pipe, and then turn it to lock it into place.
1
3
► 1. Adapter pipe 2. Front pipe
2.
nozzle with the protrusion on the adapter pipe, then
attach the flat nozzle or extension nozzle to the adapter
pipe, and then turn it to lock it into place.
2
► 1. Flat nozzle 2. Extension nozzle 3. Adapter pipe
6 ENGLISH
Align the groove on the adapter pipe with the pro-
1
Align the groove on the flat nozzle or extension
1
2
2
3