Isolation Feet - Cary Audio Design DMS-800PV Owner's Manual

ISOLATION FEET

The DMS-800PV use a unique combination of isolation spikes and aluminum discs to reduce vibrations and resonance. This
is an integral part of the design, and it is highly recommended that these be used. Doing so will improve the overall
frequency extension. Simply screw in the spikes to the underside of the permanently attached feet, then place the
aluminum discs under the spike so that the spikes sit inside the indents of the aluminum discs. This may require a little
jostling of each disk until each seems perfectly seated so that the entire chassis feels firmly planted and stable.
12