Advertisement
Add and Reduce key:
Turn over #0 #15 units under check status;
Cancel key:
Press this key to cancel parameter setting under setting status; Press and hold
this key for 3 seconds to cancel timing when timing is valid;
Mode key:
Choose water heating mode of the unit (floor heating and water cooling are not
available). When the screen is unlocked, press "Mode" once to enter into mode setting.
4. Operation instruction
4.1 Turn On and Turn Off the
4.1 Turn On and Turn Off the
main unit
main unit
1) Press the On/Off key to control On and
Off status of the main unit.
2) Under Off status, press the On/Off key
"
" to run the main unit, at that time
the LCD of wire controller will display the
operation icon "
running as the current setting
of the wire controller.
3) Under On status, press the On/Off key
"
" to turn off the main unit and the
operation icon "
disappear.
Move up or move down values of temperature, timing, water level etc;
". The main unit will
" on the LCD will
RUN
HEAT
WATER
TEMP.
TIMER
MODE
FUNCTIONS
(Long press 3s
for cancelling timing)
CYCLE
ONLINE
QUANTITY
Press one time
(Long press 3s
for unlocking)
Fig.4-1
Advertisement
