Advertisement
4) Set working mode(valid when wire controller set to 2,3,4)
Press "MODE" key to enter the working mode setting when the main unit is off power.
key to adjust , press "OK" key or wait for 7 seconds to confirm and back to the
"MODE"
main page; During setting process pressing "CANCEL" key to exit without saving. The
controller will show different working mode when it is applied to different main unit . See
fig.4-9.
RUN
HEAT
WATER
TEMP.
MODE
(Long press 3s
for cancelling timing)
Working mode setting is valid only when the unit is power off.
"COOL" and "HOT WATER" are not avaiable.
CYCLE
ONLINE
QUANTITY
FUNCTIONS
(Long press 3s
for unlocking)
Fig.4-9
NOTE
Press the
Advertisement
