Advertisement
7)
: Displays when no key operation for 2 minutes and all keys are locked.
Press and hold "OK" key for 3 seconds to unlock;
8)
: Displays when error or protection occurs and means the unit need
maintainence by professionals.
On-line unit qty. indication:
the wire controller; under check status display the device serial number;
Water level indication:
status displays setting value;
Clock:
Under normal status displays clock; Under timing setting displays the setting timing,
details refer to Page 13;
Water temperature: Under normal status display water temperature; Under water temperature
setting status displays the setting value; Under cycle heating water temperature setting status
displays the setting value; under check status displays check parameter, details refer to Page
7;
ON/OFF key: Turn
Right and Left key:
heating water temperature and setting water level under main page; Press right key to shift to
the next step setting under timing setting status; Press these keys to turn over the unit
parameter information under check status;
OK key:
Press this key to confirm settings. Press and hold this key for 3 seconds to unlock
under locking status;
FUNCTIONS key:
Press and hold this key for 3 seconds to enter check status, details refer to Page 14;
Under normal status display the quantity of units connected to
Under normal status displays water level; Under water level setting
on and turn off functions; details refer to page 6.
Press these keys to check setting water temperature, setting cycle
Setting water temperature, timing and mode etc, details refer to Page 7-13;
Advertisement
