Minimum Seat Post Insert - Cannondale MOTO Owner's Manual Supplement

Hide thumbs Also See for MOTO:

Table of Contents

SEATPOST

SEATTUBE

Minimum Seat Post Insert Depth (MOTO CARBON)

For moto carbon frames, the seat post must be inserted a minimum of 100mm or 4 inches

WARNING

MAKE SURE AT LEAST 100 mm OF THE SEAT POST IS INSERTED INTO THE FRAME AT ALL

TIMES. Failure to insert the seat post at least 100 mm can place a very high stress on the seat

tube top tube junction causing the frame to fail while riding.

remove the seat post. measure 100 mm from the bottom of the seat post. Use a permanent

marker to mark the post at 100 mm.

never adjust the seat post so that the line you mark is above the top edge of the seat tube.

yoU mUst aLso Be aWare tHat bicycle seat posts are permanently marked by the

manufacturer with a "minimUm insert" line on the seat post itself. you must not rely on this

marking as an indication of the proper minimUm seat Post insertion DePtH.

YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IN AN ACCIDENT

IF YOU IGNORE THIS WARNING.

100mm

When adjusting the seat post height in the seat tube,

117.PDF

Table of Contents