Head Tube - Cannondale MOTO Owner's Manual Supplement

HEAD TUBE

Top Cap
Compression Ring
Bearing
8H x 52 x Ø40 x 45° x 45°
Upper Bonded Cup
KP002/
Lower Bonded Cup
Bearing
8H x 52 x Ø40 x 45° x 45°
Crown Race
MOTO CARBON frames feature permanently bonded headset bearing cups (above left). the
cups accept only the Cannondale headset bearing in the kit shown above. the headset kit is
compatible with 1.5" steerers.
MOTO ALLOY frames are compatible the one.Point.Five standard and one.Point.Five to 1 1/8"
conversion headsets.
CAUTIONS
1. Do not face, surface, or cut the head tube or bearing cups for any reason.
2. Please note that when removing bearings from bonded cups, extra care must be used so
that the tool used to drive out the bearing is not located on any part of the bonded cup.
MOTO CARBON
KP081/
only
MOTO ALLOY
KP002/
1
One.Point.Five
compatible