Cannondale MOTO CARBON Owner's Manual Supplement
  1. Manuals
  2. Brands
  3. Cannondale Manuals
  4. Bicycle
  5. MOTO CARBON
  6. Owner's manual supplement
Cannondale MOTO CARBON Owner's Manual Supplement

Cannondale MOTO CARBON Owner's Manual Supplement

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2010
READ THIS SUPPLEMENT AND YOUR
WARNING
CANNONDALE BICYCLE OWNER'S MANUAL.
Both contain important safety information.
Keep both for future reference.
MOTO
125237.PDF

Advertisement

Table of Contents
loading

Related Manuals for Cannondale MOTO CARBON

Summary of Contents for Cannondale MOTO CARBON

  • Page 1 2010 READ THIS SUPPLEMENT AND YOUR WARNING CANNONDALE BICYCLE OWNER’S MANUAL. Both contain important safety information. Keep both for future reference. TOWNER’SM MANUALSUP UPPLEMENTO MOTO 125237.PDF...
  • Page 2 In this supplement, particularly important information is presented in the following ways: Indicates a hazardous situation which, if not WARNING avoided, could result in death or serious injury. Indicates special precautions that must be taken to NOTICE avoid damage. A TIP provides helpful information. This manual meets EN standards 14764, 14766, and 14781.

  • Page 3: Safety Information

    Your bike (frame and components) is made from Inspect frame carefully for damage (See PART II, Section composite materials also known as “carbon fiber.” D. Inspect For Safety in your Cannondale Bicycle Owner’s Manual. ) All riders must understand a fundamental reality of composites.

  • Page 4: Intended Use

    Consult your Cannondale Dealer about how you 1/16” (1.6 mm) tire clearance from any part of the bike.

  • Page 5: Geometry /Specification

    GEOMETRY /SPECIFICATION MINIMUM SEAT POST INSERT DEPTH (MOTO CARBON) (MOTO CARBON) For MOTO carbon frames, the seat post must be inserted a 2010 You’ll need to obtain a high-quality carbon gel to install and minimum of 100mm or 4 inches 2009 maintain the seat post and your carbon frame.
  • Page 6 FRAME SERIAL NUMBER LOCATION (7-character barcode label) 5-DIGIT SEQUENCE IN YEAR 6-DIGIT SEQUENCE IN YEAR FACILITY CODE YEAR CODE YEAR CODE Use this serial number for warranty registration and theft recovery. See your Cannondale Bicycle Owner’s Manual for more information on warranty registration.
  • Page 7 125237.PDF SHOCK LINK / PUSH / LINK/ SWINGARM PIVOT SHOCK LINK ASSEMBLY SHOCK BOLTS 11 Nm 9 Nm 98 In Lbs PUSH LINK ASSEMBLY 80 In Lbs 11 Nm 98 In Lbs MAIN PIVOT ASSEMBLY 16 Nm 142 In Lbs TIGHTENING TORQUES NO.

  • Page 8: Rear Derailleur

    8H x 52 x Ø40 x 45° x 45° Crown Race MOTO CARBON frames feature permanently bonded headset bearing cups (above left). The cups accept only the Cannondale headset bearing in the kit shown above. The headset kit is compatible with 1.5” steerers.

  • Page 9: Rear Shock

    125237.PDF REAR SHOCK 14.25 mm NOTICE: ROCKSHOX MONARCH : Don’t forget to move the swiveling air valve to the tucked position (above left) to prevent interference with the swing arm and seat stay bridge. If the linkage contacts an extended valve (above right) it may be damaged or snap off.

  • Page 10: Frame Guards

    Loctite 242 (blue) 13 Nm, 115 In Lbs THRU AXLE 135mm MAXLE CHAINSLAPPER KP080/ Replace the chainslapper if it is missing or damaged. Available as Cannondale kit KF092./ Loctite 242 (blue) 135mm STANDARD QR DROPOUTS 13 Nm, 115 In Lbs KP078/...

  • Page 11: Bottom Bracket

    125237.PDF BOTTOM BRACKET BEARING INSTALLATION 1. Clean the inside and outside surfaces of the bottom The MOTO CARBON bottom bracket shell is compatible with the BB30 Standard. See http://www.bb30standard.com/ . The SI bracket shell. bottom bracket adapter enables the use of standard English/73mm bottom bracket cranksets. See page 18.

  • Page 12: Drive Side

    Make sure the Receiver part of the tool is centered on the drive side bottom bracket shell while pressing. NOTICE We strongly recommend that your have this procedure performed by an Authorized Cannondale Dealer. Damage caused by We strongly recommended that you use a swab to control the application and avoid spillage of the Loctite. Prolonged contact improper removal is not covered under your warranty.

  • Page 13: Maintenance

    The following table lists only supplemental maintenance items. Please consult your Cannondale Bicycle Owner’s Manual for more information on basic bike maintenance. Consult with your Cannondale Dealer to create a complete maintenance program for your riding style, components, and conditions of use. Follow the maintenance recommendations given by the component manufacturers for the various non-Cannondale parts of your bike.
  • Page 15 UPPLEMENT NTOWNER’SM SMANUALSU CANNONDALE USA CANNONDALE EUROPE CANNONDALE AUSTRALIA CANNONDALE JAPAN Cannondale Bicycle Corporation mail: Postbus 5100 Unit 6, 4 Prosperity Parade, Namba Sumiso Building 9F, 172 Friendship Road, Bedford, visits: Hanzepoort 27 Warriewood N.S.W., 2102, Australia 4-19, Minami Horie 1-chome,...

This manual is also suitable for:

Moto alloy

Table of Contents