Table of Contents
Advertisement
PCI/PnP Setup,
Continued
USB IRQ Priority These options specify the IRQ priority for USB devices installed in the Slot-
1 expansion slot. The settings are Auto, IRQ5, IRQ9, IRQ10, and IRQ11, in
priority order. If Auto is selected, AMIBIOS automatically determines the
optimal IRQ priority order. The Optimal and Fail-Safe default settings are
Auto.
PCI Slot-1 IRQ Priority
PCI Slot-2 IRQ Priority
PCI Slot-3 IRQ Priority
PCI Slot-4 IRQ Priority These options specify the IRQ priority for PCI devices installed in the
computer. The settings are Auto, 3, 4, 5, 7, 9, 10, 11, 12, and 14, in priority
order. If Auto is selected, AMIBIOS automatically determines the optimal IRQ
priority order. The Optimal and Fail-Safe default settings are Auto.
The second heading is:
Secondary Bus-1 Options
PCI Slot-5 Latency
PCI Slot-6 Latency
PCI Slot-7 Latency
PCI Slot-8 Latency This option specifies the latency timings (in PCI clocks) for PCI devices
installed in the Slot-5, Slot-6, Slot-7, and Slot-8 expansion slots. The setting is
248Clks. The Optimal and Fail-Safe default settings are 248Clks.
PCI Slot-5 IRQ Priority
PCI Slot-6 IRQ Priority
PCI Slot-7 IRQ Priority
PCI Slot-8 IRQ Priority This option specifies the IRQ priority for PCI devices installed in the
Slot-5, Slot-6, Slot-7 and Slot-8 expansion slots. The setting is 248Clks. The
Optimal and Fail-Safe default settings are 248Clks.
Chapter 2 AMIBIOS Setup
Cont'd
61
Advertisement
Table of Contents
