Table of Contents
Advertisement
Quick Start,
Continued
Setting Up Pager Database Options In order to use the pager feature, your local machine must
have a modem installed and correctly set up in Windows. Also, it must be
connected to an active phone line.
If an alert or warning is issued, you can set up ASM Console to dial a pager and
enter a code to be displayed on the pager. Click on the Pager Database button on
the toolbar to bring up the Pager Database screen.
Use the following procedure to set up the pager feature:
Step
1
Click on the Health Information group to enable the health buttons.
2
Click on the Pager Database button on the toolbar to open the Pager
Database window.
3
Enter the user name and pager information.
4
Click the Add button.
5
To add more users, enter their information, and click Add.
6
When all the users have been entered, click OK.
For more information on the Pager Database window, refer to Pager Database in
the online help or on page 107 of this manual.
82
Megaplex Quad Pentium II Xeon PCI ISA System Guide
Action
Cont'd
Advertisement
Table of Contents
