Table of Contents
Advertisement
• Maintain charger cord. When unplugging char-
ger, pull plug rather than cord to reduce the risk of
damage to the electrical plug and cord. Never carry
charger by its cord. Keep cord from heat, oil and
sharp edges. Make sure cord will not be stepped on,
tripped over or subjected to damage or stress. Do
not use charger with damaged cord or plug. Have a
damaged charger replaced immediately.
•
If the external flexible cable or cord of the product
is damaged, it shall be exclusively replaced by the
manufacturer.
• Use only recommended attachments. Use of an
attachment not recommended or sold by the battery
charger or battery pack manufacturer may result in a
• Unplug charger when not in use. Remove battery
packs from unplugged chargers.
•
To reduce the risk of electric shock, always
unplug charger before cleaning or maintenance.
Do not allow water to flow into AC/DC plug. Use a
residual current device (RCD) to reduce shock
hazards.
•
Store your battery and charger in a cool, dry
place.
Do
not
temperatures may exceed 50°C (120°F) such as in
direct sunlight, a vehicle or metal building during
the summer.
SERVICE
• Have your light serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the light is
maintained.
Never service damaged battery packs. Service
•
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
LIGHTS
The lens may get hot during use.
WARNING
To reduce the risk of burns, do not
touch hot lens.
•
Always use common sense and be cautious
when using the product. It is not possible to
anticipate every situation that could result in a
dangerous outcome. Do not use this product if you
do not understand these operating instructions or
you feel the work is beyond your capability; contact
Tool or a trained professional for
MILWAUKEE
®
additional information or training.
•
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE
replacement.
•
The light source contained in the product shall only
be replaced by the manufacturer, its service agent
or a similar qualified person.
SAVE THESE INSTRUCTIONS
ADDITIONAL BATTERY SAFETY RULES
To reduce the risk of fire, personal
WARNING
injury, and product damage due to
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater , certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
Do not charge non-rechargeable
WARNING
batteries.
store
battery
pack
service facility for a
®
SPECIFICATIONS
Cat. No. .............................................. M18 POALC
DC Input Volts..................................................... 18V
DC Output Volts .................................................. 18V
DC Output Power............................................. 45W
AC Input Volts ............................................ 220-240V
Frequency.................................................. 50-60Hz
AC Input Power............................................... 130W
Output Volts USB.................................................. 5V
Output Amps USB ............................................. 2.1A
Operating Temperature
Battery and Charger ............................0°C to 65°C
Battery and Tool ................................-20°C to 40°C
IP rating........................................................... IP54
M18
Li-Ion Battery Packs ...................... 18V DC
TM
FUNCTIONAL DESCRIPTION
1
where
1. MODE button
2. Power button
3. Brightness button
4. Charger indicators
5. Battery bay
6. Handle
7. USB Outlet
8. Power plug
9. USB power button
3
(32°F to 150°F)
(-4°F to 104°F)
2
3
9
8
4
5
6
7
Advertisement
Table of Contents
