Page 1
OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. / No de cat. 48-59-1801 2710-20 Cat. No. / No de cat. 48-11-1815 48-11-1820 Cat. No. / No de cat. 48-11-1828 48-11-1840 48-11-1850 New batteries must be charged before 48-11-1860 first use.
Make sure that handle. READ AND SAVE the extension cord is in good electrical condition. 9. CHARGER 48-59-1801 IS RATED FOR 120 VOLT ALL INSTRUCTIONS AC ONLY. CHARGER 2710-20 IS RATED FOR 12 VOLT DC AND 120 VOLT AC. Charger must FOR FUTURE be plugged into an appropriate receptacle.
Continuous green light: Charging is complete charge as needed. Compared to NiCd battery pack types, MILWAUKEE Flashing red: Battery is too hot/cold - Charging will Li-Ion battery packs deliver fade-free power for their begin when battery reaches correct entire run time.
Disposing of MILWAUKEE Li-Ion alternating pattern and the tool will not run. Allow the Battery Packs battery to cool down. MILWAUKEE Li-Ion battery packs are more environ- Fuel Gauge Lights Diagnosis Solution mentally friendly than some other types of power tool...
Page 5
Red Charger Charging Status Remove the battery pack from the tool for charging Temperature Indicator Light when convenient for you and your job. MILWAUKEE Too Hot Fast Flashing Not charging batteries do not develop a "memory" when charged Normal Range...
APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU date of purchase. Return of the battery pack to a MILWAUKEE factory OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL.
Need help?
Do you have a question about the 48-59-1801 and is the answer not in the manual?
Questions and answers