3. Remove the burner. It is held in place with 6 screws (1/4" nutdriver).
4. Remove the burner support as shown below. It is held in place with 6 screws (1/4" nutdriver) and 4
nuts (11/32" nutdriver).
5. Remove and discard the NG (stock) manifold cover and orifice gasket (1/4" nutdriver). Install the LP
manifold cover included in the owner's pack.
© Travis Industries
Installation
(for qualified installers only)
4/23/2021 - 1353
53
4415HO GSR2