Fireback Installation
Fireplace must not be operated without the firebacks in place.
The directions below show installation of metal firebacks. If using ceramic firebacks, follow the
directions included with the firebacks (the rear fireback clips are removed and discarded).
1
Access the firebox.
2
Remove the two rear fireback clips from the firebox ceiling (1/4" nutdriver). The clips are located along
the upper rear edge of the firebox.
3
Install the rear fireback. Hold the fireback at an angle while installing to allow it to pass through the
firebox opening.
4
Replace the rear fireback clips to secure the rear fireback in place.
© Travis Industries
Installation
(for qualified installers only)
4/23/2021 - 1353
49
4415HO GSR2