Basic Settings; Overview Of Basic Settings - Siemens iQ300 User Manual

Basic settings

Basic settings
You can configure the appliance to meet your needs.
Basic settings

Overview of basic settings

The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dispensing
Intensive drying
Hot water
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
Display text Selection
1
H:04 H:00 - H:07
1
r:04 r:00 - r:06
1
d:00 d:00 - d:01
1
A:00 A:00 - A:01
Basic settings en
Description
Set the water softening system to
your water hardness.
→ "Setting water softening system",
Page 29
Level H:00 switches the water
softening system off.
Set the amount of rinse aid to be dis-
pensed.
→ "Setting the amount of rinse aid",
Page 31
Switch the rinse aid system off with
level r:00.
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note: Not suitable for delicate items
of tableware.
Switch Extra Dry on "d:01" or off
"d:00".
Set cold water or hot water connec-
tion. Only set the appliance to hot
water if this can be prepared with
little energy and a suitable installa-
tion is available, e.g. solar heating
system with circulation line. The wa-
ter temperature should be at least
40 °C and max. 60 °C.
Switch hot water on "A:01" or off
"A:00".
39