Aquasensor; Installation And Connection; Scope Of Supply; Installing And Connecting The Appliance - Siemens iQ300 User Manual

Hide thumbs Also See for iQ300:
Table of Contents

Advertisement

1

AquaSensor

The AquaSensor is an optical meas-
uring device (light barrier) which
measures the turbidity of the washing
water. You can save water with the
AquaSensor.
Use of the AquaSensor depends on
the programme. If the soiling level is
low, the washing water is used in the
next wash cycle, so reducing water
consumption by 3-6 litres. If the soil-
ing level is is greater, the washing
water is drained off and replaced with
fresh water. In the automatic pro-
grammes the temperature and run-
ning time are additionally adjusted to
the level of soiling.

Installation and connection

Installation and connec-
tion
Installation and connection

Scope of supply

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance was tested at
the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Instruction manual
¡ Installation instructions
1
¡ Warranty
¡ Installation material
¡ Steam guard plate
1
Depending on the appliance specifications
1
Installation and connection en
¡ Rubber apron
¡ Mains cable
¡ Quick reference guide
Installing and connecting the
appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
"Follow the safety instructions."
1.
→ Page 4
"Follow the instructions for elec-
2.
trical connection." → Page 14
Check the "Scope of supply"
3.
→ Page 13 and the condition of
the appliance.
Consult the installation instructions
4.
for the installation dimensions re-
quired.
Make the appliance level using the
5.
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
"Install the drainage connection."
6.
→ Page 14
"Install the drinking water connec-
7.
tion." → Page 14
Connect the appliance to the
8.
power supply.
1
1
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents