Washing Results - Siemens iQ300 User Manual

Fault
Another error code appears
on the display.
E:01 to E:30

Washing results

Fault
Tableware is not dry.
Cause
A technical fault is present.
Cause
No rinse aid used or dosage
set too low.
Selected programme has no
drying phase
Water collects in recesses of
the tableware or cutlery.
The combined detergent
used has a poor drying per-
formance.
Extra Dry not activated to im-
prove drying performance.
Troubleshooting en
Troubleshooting
Press .
1.
Unplug the appliance or switch off
2.
the fuse.
Wait at least 2 minutes.
3.
Insert the mains plug of the appli-
4.
ance in a socket or switch on the
fuse.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press ⁠ .
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact "Customer Service"
‒
→ Page 59 and give the er-
ror code.
Troubleshooting
Add "Rinse aid" → Page 31.
1.
Set the amount of rinse aid to be
2.
dispensed.
Select a programme with drying.
▶
Position tableware at an angle
▶
where possible.
Use rinse aid to improve drying per-
1.
formance.
Use a different combined detergent
2.
with a better drying performance.
Activate Extra Dry.
▶
49