Table of Contents
Advertisement
Basic settings
15 Basic settings
You can set the basic settings of your device according to your wishes.
15.1 Overview of the basic settings
The basic settings depend on the equipment of your device.
Basic setting
Water hardness
Rinse aid
deldosage
Intensive drying
Hot water
Factory setting (may differ depending on device type)
1
36
Display
Choice
text
H04
H00 - H07
1
r05
r00 - r06
1
d00
d00 - d01
1
A00
A00 - A01
1
Description
Set water softening to the
water hardness.
→ "Set water softening",
page 26
At position H00 the water
softening is switched off.
Set the amount of rinse aid.
Switch off the rinse system
at position r00.
During the final rinse, the
temperature is increased,
which achieves better drying
results. The running time
may therefore increase
slightly.
Remark:Not suitable for
sensitive items of crockery.
Switch on intensive drying
"d01" or disable "d00".
Set cold water connection or
hot water connection. Only
set the device to Hot water if
the hot water is prepared in
an energetically favorable
manner and a suitable
installation is available, e.g. a
solar boiler with circulation
pipe. The water temperature
must be a minimum of 40 °C
and a maximum of 60 °C.
Turn on hot water
"A01" or disable "A00".
Advertisement
Table of Contents
