Switching Off Water Softening System; Regeneration Of The Water Softening System - Siemens iQ300 User Manual

en Water softening system
Switching off water softening
system
Note
To avoid damage to the appliance, only
switch off the water softening system in
the following cases:
¡ The water hardness is max. 26 °E
and you are using combined deter-
gents with salt replacement sub-
stances. According to manufactur-
ers, combined detergents with salt
replacement substances can gen-
erally only be used up to a water
hardness of 26 °E without adding
special salt.
¡ The water hardness is 0 - 8 °E.
You do not need to use special
salt.
Press ⁠ .
1.
Hold programme button A and
2.
press repeatedly until the dis-
play shows H:xx.
Overview of consumption values with regeneration the water softening
system
Here you can find an overview of the maximum additional running time and
consumption values during regeneration of the water softening system.
You can find the column applicable to your model in the quick reference guide
according to its water consumption in the Eco 50° programme.
Water consump-
tion in litres (de-
pending on
model)
6.5 / 6.7
8.5
9.5
above 10
The consumption values specified
are laboratory measurements determ-
ined in accordance with the currently
30
Regeneration of
the water soften-
ing system after
x rinse cycles
8
7
6
5
Release programme button A and
3.
a Programme button A flashes and
the display shows H:04.
Press programme button C re-
4.
peatedly until the display shows
H:00.
Press
5.
a The water softening system is
switched off and the salt refill indic-
ator is deactivated.
Regeneration of the water
softening system
In order to obtain fault-free function of
the water softening system, the appli-
ance performs reheating of the water
softening system at regular intervals.
Regeneration of the water softening
system takes place before the end of
the main rinse cycle in all pro-
grammes. It will increase the run time
and consumption values, e.g. water
and electricity.
Additional run-
ning time in
minutes
6
6
6
6
⁠ .
to save the setting.
Additional water
consumption in
litres
5
5
5
5
Additional power
consumption in
kWh
0.05
0.05
0.05
0.05