Advertisement
29. Use PH1 screwdriver to remove FG screw
30. Disconnect fan connector and inlet connector
31. Use PH1 screw driver to remove PCB1 screw
32. Use PH1 screwdriver to remove AC inlet & Fan screw
33. Heat the solder of the Electrolytic Capacitors of greater than 2.5cm in diameter or height and Remove it
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the
product that require selective treatment (with descriptions and arrows identifying locations).
Open access panel
Step1
Step 3 Press the Graphic card's latch
Step 5 Loose the screws of HDD and remove HDD from HDD
cage
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at
Step2 Remove front bezel from chassis
Step 4 Unplug Graphic card
Step 6 Disconnect HDD power cable and HDD SATA cable
from HDD
EL-MF877-01
Page 3
Advertisement
