Advertisement
Item Description
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing refractory
ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Hexagon Screw Driver
Crisscross Screw Driver
Electric Iron
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Open access panel
2. Remove Front Bezel from chassis
3 Press the Graphic card's latch
4 Unplug Graphic card
5. Loose the screws of HDD and remove HDD from HDD cage
6. Disconnect HDD power cable and HDD SATA cable from HDD
7. Disconnect all cables from MB
8. Remove the driver cage from Chassis
9. Disconnect system fan cable from MB
10. Disconnect cooler fan cable from MB
11. Remove the Fan duct from cooler
12. Use T-15 screwdriver to loose the screws and remove cooler
13. Use PH1 screwdriver to loose the screws and remove the fan
14. Separate the fan from cooler
15. Remove memory from MB
16. Rotate the handle and open it up
17. Remove the CPU from the board
18. Remove the battery from the system board
19. Remove speaker from Chassis
20. Remove WLAN M.2 Card
21. Use T-15 screwdriver remove the screws on the PSU Chassis
22. Disconnect the PSU cable from the MB
23. Use T-15 screwdriver to loose the screws of MB from board
24. Remove MB from chassis
25. Press the PSU's latch on chassis
26. Remove the PSU from chassis
27. Use PH1 screwdriver to remove screw for the PSU
28. Remove cover
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
HPI instructions for this template are available at
EL-MF877-01
Quantity of
items
included in
product
Tool Size (if
applicable)
T-15
PH1
QUICK 310
Page 2
Advertisement
