Advertisement
Step 29 Use PH1 screwdriver to remove FG screw
Step 30 Disconnect fan connector and inlet connector
Step 31 Use PH1 screw driver to remove PCB1 screw
Step 32 Use PH1 screwdriver to remove AC inlet & Fan screw
Step 33 Heat the solder of the Electrolytic Capacitors of greater
than 2.5cm in diameter or height and Remove it
EL-MF877-00
Page 10
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at
EL-MF877-01
Advertisement
