RH Baby&child BELLE TWIN DAYBED Instructions

PA RTS I N CLU DE D:
A [1] BA C K SEC TI O N
B [1 ] L EF T SI D E SEC T I ON
C [1 ] R I G H T S I D E SE C T I ON
D [1 ] S I D E R A I L
E [ 3 ] S T R ET CH E R B A R S
F [2 ] T OP F L AT F O RM P A N E LS
T O O L S N E E DE D:
Phillips Head Screwdriver (not included)

ASSEMBLY INSTRUCTIONS:

Note:
- Bed must be assembled by at least two people.
- Please read instructions carefully before assembling bed.
- Use the above parts and fittings list to identify each component.
- Keep all packing materials until assembly is complete to avoid loss of smaller parts.

STEP 1:

Place the hooks of the Left/ Right Side Sections (B,C) into the slots in the Back Section (A). If necessary, using a thick
magazine or book to protect the Left/ Right Side Sections (B,C), hammer with a mallet or hammer until tight.
A
B E L L E T W I N D A Y B E D I N S T R U C T I O N S
B
Page 1 of 3
NO. ITEM
1
2
3
4
5
6
DESCRIPTION QTY.
Bolts 5/16" x 2-1/2" 4 pcs.
Spring Washers 5/16" 4 pcs.
4 pcs.
Flat Washers 5/16"
Allen Key 4mm 4 pcs.
15 pcs.
Screws 8 x 30mm
3 pcs.
Screws 8 x 25mm
C