RH Baby&child BELLE WIDE DRESSER Instructions

PARTS I NC LUD E D
A [1] WIDE DRESSER
TO O L S N E E D E D
PHILLIPS-HEAD SCREWDRIVER ( NOT INCLUDED)
F U R N I T U R E T I P P I N G R E S T R A I N T :
YOUNG CHILDREN MAY BE INJURED BY TIPPING
FURNITURE AND THE USE OF A TIPPING RESTRAINT
IS HIGHLY RECOMMENDED. WHEN PROPERLY
INSTALLED, THIS RESTRAINT COULD PROVIDE
PROTECTION AGAINST THE UNEXPECTED TIPPING
OF FURNITURE DUE TO SMALL TREMORS, BUMPS
OR CLIMBING. WE RECOMMEND MOUNTING THIS
RESTRAINT TO A WALL STUD.
W A R N I N G :
THIS PRODUCT IS ONLY A DETERRENT. IT IS NOT A
SUBSTITUTE FOR PROPER ADULT SUPERVISION.
A S S E M B LY I N S T R U C T I O N S :
1. ATTACH ONE OF THE METAL BRACKET NEAR THE TOP
BACK EDGE OF THE FURNITURE PIECE BY INSERTING
THE SHORTER SCREWS.
2. DETERMINE THE FINAL POSITION OF THE FURNITURE
PIECE. MARK LOCATION ON THE WALL APPROXIMATELY 2"
BELOW THE BRACKET MOUNTED TO THE BACK OF THE
FURNITURE.
3. DRILL A STARTER HOLE INTO THE WALL STUD. IF WALL
STUD IS NOT AVAILABLE, DRILL A HOLE INTO THE
WALL AND INSERT PLASTIC ANCHOR. GENTLY TAP THE
ANCHOR UNTIL THE FLANGE OF THE ANCHOR IS FLUSH
WITH THE WALL.
4. ATTACH THE SECOND BRACKET BY INSERTING THE
LONGER SCREW THROUGH THE BRACKET AND INTO
THE WALL.
B E L L E W I D E D R E S S E R I N S T R U C T I O N S
NO.
page 1 of 2
ITEM
1
2
3
Phillips Screws M4x30 mm
4
Phillips Screws M4x19 mm
5
6
WALL
1
4
5
6
DESCRIPTION QTY.
Plastis Anchors 2 pcs.
Metal Brackets 2 pcs.
Cap Nut
2 pcs.
2 pcs.
2 pcs.
Metal Cable
1 pc.
2
3
Wall