Enter
1=1200 baud + ENTER button
2=2400 baud + ENTER button (or 0 + ENTER to see next page)
3=4800 baud + ENTER button
4=9600 baud + ENTER button (or 0 + ENTER to see next page)
5=19200 baud + ENTER button
6=38400 baud + ENTER button (or 0 + ENTER to see next page)
7=57600 baud + ENTER button
Changing the repeat mode to off on the ADCC200/300 keyboard:
1. Access SPECIAL CONFIG MENU by pressing SHIFT
of applying power to the keyboard.
2. Press the TELEMETRY
3. Select 2 for "MAKE/BREAK" and press the "ENTER" button (ADCC1100 OR ADCC200/
300 must be set to repeat mode = off referred to as "MAKE/BREAK" )
Configuring the ADCC1100 keyboard baud rate:
1. Press the PROGRAM tab key
2. Press the NEXT soft key
3. Press the BAUD soft key to cycle the baud rate (1200, 2400, 4800, 9600, 19200, or
38400)
4. Press the OPERATE tab key to return to normal mode
Changing the repeat mode to off on the ADCC1100 keyboard:
1. Press the PROGRAM tab key
2. Press the NEXT soft key
3. Select "MP48" soft key for repeat mode OFF or "AD1024" for repeat mode ON
(ADCC1100 or ADCC200/300 must be set to repeat mode = OFF)
4. Press the OPERATE tab key to return to normal mode
button
45
Matrix Installation and Operation
and
within 5 seconds