Quick Start Reference Guide - ACP Amana Xpress IQ AXP Series Quick Start & Reference Manual

Quick Start Reference Guide

Refer to Product Safety Manual for Safety Statements. Complete Owner's Manual available online
Oven Operation
Turn the Oven On, Preheat
This oven can be set to a preheat
temperature between 200°F (95°C) and
520°F (270°C).
1. Oven must be plugged in.
power on to "Standby mode" within approximately
30 seconds.)
2. Touch the green "Power" icon
3. The preheat temperature of the oven will
appear in the display.
Touch the power key again to interrupt
preheating, or touch the blue menu icon to
access main menu and user options.
Cooking with Preprogrammed Menu Items
1. After oven has preheated to desired temperature, open oven door,
place food in oven and close door
2. Scroll to choose desired food item from menu and touch the food item you
wish to cook. The cook cycle will begin and screen will show remaining
cook time.
Note: If "Preheat Warning" is enabled (customized user setting, see
page 6), and preheat temperature differs from default preheat temperature,
the control will interrupt cook cycle.
To guarantee that oven reaches desired temperature before cook cycle begins,
enable "Preheat Warning" in user options.
3. At the end of the cooking cycle, the oven beeps, and displays animation.
Remove the food from the oven.
©2019 ACP, Inc.
Cedar Rapids, IA 52404
|
AXP & MXP High Speed Commercial Combination Oven
Oven Clearances
A. Allow at least 2" (5.1 cm) of clearance around top of oven.
Proper air flow around oven cools electrical components.
With restricted air flow, oven may not operate properly and
life of electrical parts is reduced.
B. There is not an installation clearance requirement for the
back of the oven.
C. Allow at least 1" (2.54 cm) of clearance around sides of
oven.
D. Install oven so oven bottom is at least 3 feet (91.5 cm)
above floor.
Care and Cleaning Basics
Refer to Owner's Manual for complete instructions and
recommendations (available online)
DO
(Screen will
DO
Damp towel, plastic scouring pad, ACP Oven Cleaner
and ACP Oven Shield Protectant
DO
DO NOT
DO NOT
DO NOT
For full product documentation visit:
www.acpsolutions.com
1
wear protective gloves and glasses
always use recommended cleaning supplies:
allow oven and tools to cool before cleaning
use caustic cleaning products
use water pressure style cleaning systems
spray cleaning solution into perforations.
Page 18 of 26
Part No. 20269801
Revised 6/2019