Table of Contents
Advertisement
2. Detailed Descriptions
Feed Out
• After the copies have been stapled, the stack feed-out motor [A] starts.
• The pawl [B] on the stack feed-out belt [C] transports the set of stapled copies up and feeds it to the
shift tray exit roller [D].
• When stapling starts, the exit guide motor [E] opens the upper exit guide [F], which includes the
upper shift tray exit roller [G], in order to feed out the leading edge of the copy set smoothly.
• The exit guide motor turns on again a certain time after stapling is complete, and the upper exit
guide plate is lowered. Then the shift tray exit roller takes over the stack feed-out.
• The on-off timing of the exit guide motor is detected by the exit guide open sensor [H].
• The stack-feed-out motor turns off when the pawl actuates the stack feed-out belt home position
sensor [I].
62
Advertisement
Table of Contents
