2. Detailed Descriptions
Punch Waste Collection
Punch waste is collected in the punch waste hopper [A] positioned under the punch unit.
• When the level of the punch waste in the hopper rises as far as the hole [B] in the hopper, the
punch waste sensor [C] turns on, stops the job, and triggers a messageto indicate that the hopper is
full and must be removed and emptied.
• The job resumes automatically after the hopper is emptied and returned to the finisher.
• The punch waste hopper sensor also functions as the hopper set sensor. When the hopper is not in
the finisher, or if it is not inserted completely, the spring loaded sensor arm rotates up and to the
right with the punch waste sensor away from the hole in the hopper holder and a message is
displayed.
• The message in this case is the same as the hopper full message.
70