Ricoh SR4080 Field Service Manual page 51

Symbol Name
S26 Stapler Return
S27 Staple Waste Hopper
S28 Punch Waste Hopper
S29 Punch HP 1
S30 Punch HP 2
S31 Shift Jogger HP
SENSORS
S32 Shift Jogger Lift HP
S33 Top Fence HP
S34 Bottom Fence HP
SOLENOIDS
SOL1 (Upper) Tray Junction Gate
SOL2 Stapler Junction Gate
SOL3 Pre-Stack Junction Gate
SOL4 Pre-stack Paper Stopper
SOL5 Stapler Return
SWITCHES
SW1 Shift Tray Upper Limit
SW2 Front Door Safety
Function
Detects the on timing of the stapler return solenoid.
Detects when the staple waste hopper is full.
Detects when the punch waste hopper is full and detects
when the punch tray is set. Punch Unit B531 (option).
Detects the cam home position for the 2-hole punch.
Punch Unit B531 (option).
Detects the cam home position for 3/4 punch. Punch
Unit B531 (option).
Detects the home position of the jogger unit arms during
paper alignment. Jogger Unit B513 (option).
Detects the when both shift jogger fences are at the
lowered position and ready to move against the sides of
the stack. Jogger Unit B513 (option).
Detects the top fence home position for Z-fold paper
staple mode.
Detects the bottom fence home position for Z-fold paper
staple mode.
Drives the tray junction gate.
Drives the stapler junction gate.
Drives the pre-stack junction gate.
Drives the stopper pawl of the pre-stacking tray.
Positions the stapler correctly on its return from the staple
supply point.
Cuts the power to the shift tray lift motor when the shift
tray position is at its upper limit.
Cuts the dc power when the front door is opened.
Overview
49