Table of Contents
Advertisement
11
DISPLAY key
This key is used to switch the window mode.
Waveform + Digital
Expanded Waveform
Digital + Calc.
12
CURSOR (ALM CLR) key
Press the CURSOR key to switch between the A and B cursors during a data replay operation. If the
Alarm setting has been specified as "Alarm Hold", press this key to clear the alarm. The alarm settings
are made in the [TRIG] menu.
13
FILE key
Press the FILE key to save data to the ZR-RX40's internal memory and to a USB memory device.
14
NAVI key
Press the NAVI key to display operational descriptions during the Free Running status, and during data
capture and data replay operations.
ZR-RX40 Start Up Guide
• Waveform + Digital
This is the default screen when the ZR-RX40 is turned on, and both
waveforms and digital values are displayed. The screen settings
can also be changed by using the SPAN/POSITION/TRACE key.
• Expanded Waveform
Displays waveforms only.
• Digital + Calc.
Displays large-size digital values and two types of
calculation processing results. The calculation settings are
made in the [DATA] menu.
Descriptions of the Control Panel Keys
25
Advertisement
Table of Contents
