Table of Contents
Advertisement
SAND FILTER INSTRUCTION MANUAL
Cleaning the bottom of the pool
The vacuuming of the pool floor is carried out in FILTRATION position of the valve. The floor cleaner must be connected with the
hosepipe to the skim vac of the skimmer. The pump must be switched off.
The hosepipe of the floor cleaner must be completely full of water so the pump does not suck air, when this is done the pump can
be started. If air enters the monobloc, stop the pump and purge the floor cleaner.
Start the pump again slowly (a start-up too quickly will raise the impurities) and brush the pool floor with the floor cleaner brush.
For monobloc without pre-filter, it is better to use a skimmer with a basket and gauze.
Monobloc's data
Model
White Pool 490
White Pool 610
White Pool 730
White Pool 910
www.cpa-piscine.it
ATTENZIONE
Monobloc [mm]
Ø 300
Ø 400
Ø 400
Ø 500
[m
/h]
3
4
6,5
6,5
10
[CV]
0,25
0,5
0,5
0,75
Rev.01–27/04/21
pag. 7 di 8
[W]
184
368
368
552
Advertisement
Table of Contents
