Application Settings; Ca Settings - Maersk Container Industry Star Cool SCI-20 Operating And Service Manual

46 of 116 pages
Value:
Values: Set from -1°C to +30°C (default 10°C).
H05 Fresh air setting
Function:
When user manually adjusts the air vent, the setting will be highlighted in the display and prompt
the user to press
Value:
Values: Set from 0 to 225 m

11.14 Application settings

11.14.1 AV/AV+
The Star Cool AV/AV+ is an application designed to automatically regulate the internal atmosphere
of the container using greatly reduced energy consumption compared to manual or other automated
fresh air systems. With a respiring cargo, the container's atmosphere attains the desired gas com-
position based on entered setpoints for maximum CO
the exchange of CO
2
AV+ OFF
Perishables will generate CO
decrease in O level inside the container. If the CO
2
the pre-set CO max level, the air exchange valve will open and thereby lower the CO
2
raise in O by diluting with ambient air.
2
For AV+ setpoints are entered via the display: Max CO
tween O and CO in the atmosphere of the container is as illustrated:
2 2
11.14.2 CA
ATTENTION! Due to regulation of the cargo atmosphere during transport, the oxygen level may
.
3 /h.
for O using ambient air.
2
AV+ Enabled
(by entering CO2 max)
via respiration, leading to an increase in the CO
2
21 %
10.5 %
0 %
via the controller which accurately regulates
2
CO2 > CO2 (max) setpoint
AV+ ON
(Fresh air vent
closed)
CO2 < CO2 (max) setpoint
level in the container atmosphere reaches above
2
level range 1 - 19.8%. The relation be-
2
CO
Fresh air vent
and a proportional
2
2
O
2
open
level and
2