Table of Contents
Advertisement
5.6.4.4 Sub-feed Parameter Reset screen
Some metering parameters for the selected sub-feed have maximum and minimum values logged over
time. The logging of these values can be reset to start over, as shown below. The selected sub-feed is
noted in the screen's upper left corner.
To reset a value, click on that value, then click the blue RESET button.
Figure 5-56: Sub-feed Parameter Reset screen
5.6.5 Thermocouple configuration settings
The name, state, limits and delays for a selected thermal sensor can be viewed or changed on the
Thermocouple Settings screens, which are opened by selecting the setting icon (
) under the
Thermocouple submenu. The user needs to be logged in as ADMIN to change values in these screens.
The values can be viewed with USER access.
Click the blue arrows
to move through the screens to access more sensors.
Figure 5-57: Thermocouple configuration screen
TruFit™
Power Distribution Unit│94-1100-00002874 A0 EN 69
Advertisement
Table of Contents
