General; Cybersecurity; Disclaimer; Ports Used By This Product - ABB TruFit User Manual

—

2 General

2.1

Cybersecurity

2.1.1 Disclaimer

This product is designed to be connected to and to communicate information and data via a network
interface. It is the Customer's sole responsibility to provide and continuously ensure a secure connection
between the product and Customer network or any other network (as the case may be). The customer
shall establish and maintain any appropriate measures (such as but not limited to the installation of
firewalls, application of authentication measures, encryption of data, installation of anti-virus programs,
etc.) to protect the product, the network, its system and the interface against any kind of security
breaches, unauthorized access, interference, intrusion, leakage and/or theft of data or information. ABB
Ltd and its affiliates are not liable for damages and/or losses related to such security breaches, any
unauthorized access, interference, intrusion, leakage and/or theft of data or information.
We recommend connecting the system in private network, if not the case additional hardware that provide
increased security controls/measures such as firewalls should be implemented.

2.1.2 Ports used by this product

Port Service
22/tcp SSH
502/tcp Modbus/TCP
25/tcp Email
110/tcp Email
143/tcp Email
465/tcp Email
587/tcp Email
993/tcp Email
995/tcp Email
69/udp TFTP
123/udp NTP
12 94-1100-00002874 A0 EN│TruFit™ Power Distribution Unit
Purpose
Valid for SSH
Valid for Modbus TCP
Valid of Email
Valid of Email
Valid of Email
Valid of Email
Valid of Email
Valid of Email
Valid of Email
Valid for Software Upgrade
Valid for Network Time Products