Graphical User Interface - ABB TruFit User Manual

3.2

Graphical user interface

The user interface is a touchscreen LCD. It shows all system status as well as providing a means to set
the unit up and control it. This is done through buttons, checkboxes, radio buttons, pull-down menus, and
text entry screens.
The GUI display/control panel displays system status as monitored by the PowerView metering system.
Monitoring details can be found in Section 5.
The GUI display/control panel is surrounded by a ring light, which displays green, yellow or red, depending
on operating status and active alarms, as described in Section 4.3.
Each PDU unit has a User Interface Board (UIB), which is provided for the user's connections.
External monitoring systems, e.g., Building Management Systems, can be used to poll the PDU units using
Modbus RTU (on an RS-485 bus) or Modbus/TCP. Each unit connected in the Modbus network shall be
configured with a unique Modbus ID.
The operation of the display module is based on the Navigation Bar.
Figure 3-1: Home screen with ABB bar highlighted
HOME
EVENTS
METERS
INPUTS
SETTINGS
HELP
INFO
LOGIN
14 94-1100-00002874 A0 EN│TruFit™ Power Distribution Unit