5.6
Setting alarm/warning limits and ratings
This section shows the PowerView configuration screens for the PDU, panel, branch and sub-feed circuits
and shows the range of adjustments that are possible using these screens.
Note: Only 'ADMIN' or higher can access these screens. The changes made are not saved until you select
the "Save" option.
The settings pages can be configured/viewed by navigating to the panel through the settings icon (
Any value on a settings screen that is blue can be changed. To change a value, click on that value. A
keyboard sub-window will open, as shown in Figure 5-32. Click on the numerals or letters to enter the
new value. Click on the keyboard icon the sub-window's lower right to close the window and set the new
value.
Figure 5-32: Edit Settings keyboard
Click
to save changes.
Click
to exit the screen without changes being implemented.
56 94-1100-00002874 A0 EN│TruFit™ Power Distribution Unit
Use caution when making configuration changes. In some cases, the GUI
may not limit you from making unwise changes that could cause the
equipment to malfunction.
).