Table of Contents
Advertisement
5.6.1 PDU configuration settings
The PDU's ratings and limits for voltage and current can be viewed or changed on the PDU's Settings
screens, which are opened by selecting the setting icon (
) under the PDU's submenu. The user needs
to be logged in as ADMIN to change values in these screens. The values can be viewed with USER access.
Figure 5-33: PDU's submenu options with 'Settings' icon
Click the blue arrows
to move through the screens.
By default, the configurations shown is from the transformer's output side, as noted by the blue bar under
the small transformer icon shown in Figure 5-34. To switch to configuration on the input side, the user
will click that transformer icon.
5.6.1.1 PDU Alarm Limits Settings screens
The over/under voltage and over-current alarm /warning limit settings can set in the PDU Limits
Configuration screen (shown below).
Figure 5-34: PDU Limits Settings screens
TruFit™
Power Distribution Unit│94-1100-00002874 A0 EN 57
Advertisement
Table of Contents
