Table of Contents
Advertisement
5.6.3 Branch configuration settings
The ratings and limits for a selected panel can be viewed or changed on the Panel's Settings screens,
which are opened by selecting the setting icon (
) under the Panel's submenu after selecting a panel on
the Metering Overview screen. The user needs to be logged in as ADMIN to change values in these
screens. The values can be viewed with USER access.
Figure 5-43: PDU's submenu options with 'Settings' icon
Click the blue arrows
to move through the screens. The specific information displayed will
depend on whether the branch is single-phase or three-phase.
5.6.3.1 Branch Alarm Limits Settings screen
The alarm /warning limit settings for power, voltage and current for the selected branch can be set in the
Panel Configuration Limits screen (shown below). The selected branch and panel are noted in the screen's
upper left corner.
Figure 5-44: Branch Alarm Limits screen – 1-pole
Figure 5-45: Branch Alarm Limits screen – 2 or 3-pole
TruFit™
Power Distribution Unit│94-1100-00002874 A0 EN 63
Advertisement
Table of Contents
