Required Tools; Mounting On The Din Rail - Emerson FB3000 Quick Start Manual

Emerson FB3000 RTU Quick Start Guide
D301859X012
April 2021

Required Tools

Certain tools and equipment are required for installing and servicing the RTU:
Table 1: Required Tools
Tool
#2 Phillips screwdriver
¼ "slotted blade screwdriver
Magnets
Non-metallic tool
Laptop PC running Field Tools with FBxConnect
configuration software

Mounting on the DIN Rail

The back of RTU chassis includes a removeable mounting plate with a slot for DIN-rail mounting,
using either 7.5 or 15 mm DIN rails.
Chassis Mounting
1 Upper tab retracts DIN rail clips
2 Lower tab extends DIN rail clips they snap back into place
2
Use
For chassis ground lug, panel installation, removal of rear
panel.
For removing personality modules l
For removing battery
For removing battery
For software configuration