Advertisement
Appearance
POWER
SPEAKERS C
RIGHT
SPEAKER IMPEDANCE:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRICAL
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Installation of FAN KIT for RKB Amplifiers
Installation of FAN KIT for RKB Amplifiers
Installation of FAN KIT for RKB Amplifiers
Installation of FAN KIT for RKB Amplifiers
1. Locate and remove the metal plate on the rear panel using
a Philips head screw driver.
2. Insert the four long screws supplied with the fan kit through the
Fan guard and into the fan. Notice the arrow on the top of fan
should point away from the rear panel and that the label on the
fan should be visible through the fan guard. Air is drawn through
the amplifier by the fan and expelled out through the fan guard.
3. Insert the plug attached to the fan into the socket marked
"OPTION RKBF-1 ONLY" the plug will only fit one-way.
4. Now tighten the four Philips head screws holding the fan and the
unit is complete. The fan will only run when the inside temperature
of the amplifier reaches 70C, it will not run all the time.
SIX CHANNEL POWER AMPLIFIER RKB-650
C
INPUT
INPUT
R
L
R
L
LINK
STEREO
SPEAKERS B
LEFT
RIGHT
LEFT
4 OHMS MINIMUM
WARNING
AVIS: RISQUE DE CHOC ÉLECTRIQUE—NE PAS OUVRIR.
B
A
SIGNAL OUTPUT
INPUT
LINK
R
L
R
LINK
STEREO
SPEAKERS A
RIGHT
LEFT
:
SHOCK HAZARD—DO NOT OPEN.
4x Screws
2
PROTECTION
A
B
LEVEL
L
OUT
IN
SIGNAL SENSE
12V TRIG
OFF
AC BREAKER
POWER AMPLIFIER
MODEL NO. RKB-650
POWER CONSUMPTION: 450 W
FAN Motor
Label
FAN Guard
RKB-650
C
Socket
Connector Plug
Advertisement
