Raid; Installing The Hard Drives; 3Ware 3Dm2 Utility User's Manual - American Dynamics Intellex Intellex DVMS Installation And Configuration Manual

Installing the Hard Drives

You must install the 4 hard drives packaged with the Intellex Ultra. The hard drives are each
contained in a caddy and are easy to install.
1 Remove the drives from the packaging.
2 Unlock the front cover of the Intellex Ultra unit and open the front cover.
3 Press the latch release on the left side of the drive caddy.
Caution
The latch must be open before installing the hard drive.
4 Carefully slide the caddy containing the hard drive into an empty slot in a drive bay and seat it
firmly. You can install any drive into any slot.
Pushing slowly lines up the connectors. If not done with care, the connectors may be damaged.
Do not use the latch to push the hard drive carriage.
5 When the hard drive is seated firmly in the drive bay, close the latch to secure the drive in the
unit.
6 Repeat this process for the remaining 3 hard drive caddies.

3Ware 3DM2 Utility User's Manual

Intellex Ultra hard drive issues, including health monitoring and notification, are managed by a
3ware 3DM2 utility. #DM2 runs on Windows and is installed on your system with the Intellex Ultra
application. Use the Help button on the 3DM2 Windows screen or go to Start > Programs > 3ware
> 3DM2 > 3DM 2 Web Interface and use 3DM2 Help to access detailed user information.

RAID

57