Flush Mounting The Base - Watlow F4T Installation And Troubleshooting User’s Manual

Dimensions
(cont .)

Flush Mounting the Base

1. Fabricate the mounting panel per the flush mount vertical or horizontal panel template
(shown below).
2. Press PEM standoffs (based on panel material) into mounting panel per supplier recom-
mendations.
PEM P/N S0-632-6 Z1
Material
(Zinc Plated)
3. Insert the controller through the flush mount bracket and lock it in place with the reten-
tion collar.
4. Mount flush mount bracket to back panel with (6) #6-32 screws.
5. Apply overlay to front panel.
Note:
Overlay is provided by the user.
Watl o w F 4T I nst al l & Tr o u bl es h o o tin g
Anderson-Bolds ~ 216-360-9800
PEM Standoffs
S0S-632-6
Steel Stainless
Steel
www.anderson-bolds.com
S0A-632-6
Aluminum
6
• •
S04-632-6
Hardened
Stainless
Steel
Chapter 2 I nstal l and W i r e