Download
Share
Print this page
Sundstrom SR 100 Operation Instruction Manual
  1. Manuals
  2. Brands
  3. Sundstrom Manuals
  4. Respiratory Product
  5. SR 100
  6. Operation instruction manual

Sundstrom SR 100 Operation Instruction Manual

Half mask apr
Hide thumbs Also See for SR 100:

Advertisement

Quick Links

Download this manual
Operation Instruction
SR 100
Half mask APR
Revision: 04
OI01H-2021 SR 100
1
2020-06-04

Advertisement

loading
Need help?

Need help?

Do you have a question about the SR 100 and is the answer not in the manual?

Questions and answers

Related Manuals for Sundstrom SR 100

Summary of Contents for Sundstrom SR 100

  • Page 1 Operation Instruction SR 100 Half mask APR Revision: 04 OI01H-2021 SR 100 2020-06-04...

  • Page 2: General Information

    Together with compressed air attachment SR 307 and SR 358 or SR 359 compressed air supply tube in accordance with NIOSH approval label for SAR. When selecting equipment for SR 100 some of the factors that should be considered are as follows: • Type of pollutants •...
  • Page 3 Unpacking the SR 100 Check that the equipment is complete in accordance with the packing list, and that no transport damages have occurred. Packing list: • Half mask • Pre-filter holder • Cleaning tissue • ID-tag • Pre-filter • Storage bag •...
  • Page 4 (such as spray painting) the small tab moulded into the particulate filter and chemical side of the cartridge. cartridge should be Push firmly and twist the coin combined. until the filter pops off. OI01H-2021 SR 100 2020-06-04...
  • Page 5 Pre-filter prevents premature clogging of the main filter. The pre-filter holder prevents damage to the main filter. N.B. The pre-filter is a pre- filter only and cannot be used as a substitute for particulate filter P100. OI01H-2021 SR 100 2020-06-04...
  • Page 6 2.2 Take out any twists or 2.4 Let the mask hang on tangles. your chest. OI01H-2021 SR 100 2020-06-04...
  • Page 7 Wiggle the respirator until it fits comfortably. Perform a fit check. 2.6 Hold the mask against your face. OI01H-2021 SR 100 2020-06-04...

  • Page 8: Adjusting The Harness

    Use your thumb and forefinger to squeeze the buckle shut. 3.2 Pull the free end away 3.4 Wiggle the respirator until from the neck until buckle it seats comfortably. pops open. OI01H-2021 SR 100 2020-06-04...
  • Page 9 Repeat the fit check until there is no leakage. NOTE! Do not push so hard that the respirator´s shape is affected. OI01H-2021 SR 100 2020-06-04...
  • Page 10 Gently not twisted and snap on the stretch the flap until it slips new harness by putting each over the stud. plastic swivel into the contoured slot and pulling it until it snaps in. OI01H-2021 SR 100 2020-06-04...
  • Page 11 Carefully check that the membranes are in contact with the membrane seats all round. 7.2 Prise off the membranes. 7.4 Press the valve covers into place. A clicking sound indicates that the cover has snapped into place. OI01H-2021 SR 100 2020-06-04...
  • Page 12 8.1 Remove the filter, the covers for the exhalation valves and the membranes, the inhalation membrane and the head harness. (Optional – The harness can be washed but takes extra time to dry.) OI01H-2021 SR 100 2020-06-04...

  • Page 13: Maintenance Schedule

    10. Maintenance schedule Before use After use Annually Visual inspection Negative fit check Cleaning Membrane change Head harness change OI01H-2021 SR 100 2020-06-04...