Table of Contents
Advertisement
KNOW YOUR BEAN TO GO
COFFEE MACHINE-
BUTTONS
FUNCTION
Power Button - Press to turn machine on/off
Double Shot Button - Press to dispense 2 shots of coffee, the
machine will grind and extract two 40ml shots
Steam Button - On the first press the machine will warm up the
boiler to produce steam, indicated by Steam Indicator Light LED
flashing. Once the boiler reaches the correct temperature this LED
will turn solid. Press again to dispense steam
Hot Water Button - Press to dispense hot water
Espresso Button - Press to dispense espresso coffee
Lungo Button - Press to dispense lungo coffee
WARNING ICONS
MEANING
Water Tank Warning
Flashing: Low water level / Water Tank is missing - please refill and
replace Water Tank (page 16)
Coffee Bean Warning
Solid Light: No more coffee beans in hopper - please refill (page 16)
Grounds Container Warning
Solid Light: Coffee Grounds Container is full - please empty (page 24)
Flashing: Internal Drip Tray or Coffee Grounds Container is missing
- please reinstall (page 24)
Infuser Warning
Solid Light: Infuser is missing or is incorrectly installed - please refit
(page 25)
Flashing: Service door is opened or not installed correctly. Please
replace Service Door (page 25)
Descale Warning - Failure to descale your machine will result in
permanent damage not covered by your Guarantee.
Solid Light: Descale is required - please descale (page 22)
Flashing Light: Machine is currently descaling
Empty System Warning
Solid Light: Empty System Function is running - please do not touch
the machine until this process has finished (page 23)
BUTTONS AND WARNINGS
10
MACHINE MODES AND SETTING
The Bean To Go coffee machine has 3 different modes: ECO, Standard and Speed.
ECO Mode
Illumination Light
No
Pre-Brewing*
Yes
Auto Shut-Off Time
10 Minutes
Selection Button
*Note: The pre-brewing function moistens the ground beans in the Infuser with a small
amount of water before full extraction. This expands the coffee grounds to build up greater
pressure in the Infuser, helping to extract all the oils. This creates a fuller flavour from the
ground beans.
SELECTING MODES
1
HOLD DOWN
2
SELECT MODE
POWER BUTTON
Turn on machine by pressing
To enter your desired
and releasing the Power
mode, press the Selection
Button. Once the machine
Button as indicated in the
has turned on - hold down
Machine Modes and Setting
the Power Button for 5
table.
seconds.
If you do not wish to change
The machine's current mode
the settings, wait 5 seconds
will be indicated by a solid
or press the Power Button
light shining through the
again.
relevent Selection Button.
The other two Selection
Buttons will be flashing.
Standard Mode
Speed Mode
Yes
Yes
Yes
No
20 Minutes
30 Minutes
3
CONFIRMATION
Your machine will beep
twice to indicate that a mode
has been selected. You may
now use your machine as
normal.
11
Hide quick links:
Advertisement
Table of Contents
