Advertisement
PULSE
Turning the speed control anti-clockwise to Y will give you a short burst at high
speed. In this direction, the knob is spring-loaded. When you let go, it'll return to 0.
ADDING INGREDIENTS
To add ingredients while the blender is working, remove the cap, pour the new
ingredients through the hole, then replace the cap.
Check that the added ingredients don't increase the volume in the jug past the
1500ml mark.
CARE AND MAINTENANCE
1.
Switch the appliance off (0) and unplug it.
2.
Wipe the outside of the motor unit with a clean damp cloth.
3.
Wash the removable parts in warm soapy water, rinse well, drain, and air dry.
4.
Don't put any part of the appliance in a dishwasher.
BLADE UNIT
You may remove the blade unit for cleaning. This is best done with the jug turned
upside down.
1.
Grip the jug handle with one hand.
2.
Grip the bottom of the blade unit with the other hand.
3.
Turn the blade unit clockwise till it comes loose from the jug base.
4.
Carefully, pull it up and out of the bottom of the jug.
5.
Lift the seal away from the blade unit.
6.
Wash the seal and blade unit in warm soapy water, rinse, and air dry.
7.
Take great care with the blades – don't handle them directly, use a nylon
washing-up brush.
8.
Replace the seal round the blade unit.
9.
Replace the blade unit in the jug base.
10.
Turn the blade unit anti-clockwise to tighten it.
5
Advertisement
