Table of Contents
Advertisement
•
Visually inspect the power connector and
make sure that it is fully secure.
•
Do not stack any devices on top of the router.
Attaching the External Antennas
The DWR-926 requires four external antennas to function
correctly: two blade antennas for 3G/4G, and two Wi-Fi
antennas. The included antennas are interchangeable, but
third party antennas may require connection to specific ports.
1. Attach the blade antennas to the SMA connectors on the
side of the router. Turn clockwise to fasten each antenna. If
you are using third party antennas that require specific ports,
the port on the left side of the device is the "MAIN" antenna,
and the port on the right side is the "AUX" or "DRX" antenna.
6
Figure 3: Attaching External Antennas
DWR-926
Advertisement
Table of Contents
