Troubleshooting - Nautilus E618 Assembly Manual / Owner's Manual

Hide thumbs Also See for E618:
Table of Contents

Advertisement

Condition/Problem
No display/partial display/
unit will not turn on
Unit operates but Contact
HR not displayed
Unit operates but
Telemetric HR not
displayed
Unit operates but
Telemetric HR displayed
incorrectly
Things to Check
Check electrical (wall)
outlet
Check connection at front
of unit
Check Power Switch
Check data cable integrity
Check data cable
connections/orientation
Check console display for
damage
Console Display
HR cable connection at
Console
Sensor grip
Dry or calloused hands
Static Handlebar
Chest Strap (optional)
Chest Strap Batteries
Interference
Replace Chest Strap
Replace Console
Interference

TROUBLESHOOTING

Make sure unit is plugged into a functioning wall outlet.
Connection should be secure and undamaged. Replace
adapter or connection at unit if either are damaged.
Turn on the power with the Power Switch.
All wires in cable should be intact. If any are visibly crimped or
cut, replace cable.
Be sure cable is connected securely and oriented properly.
Small latch on connector should line up and snap into place.
Check for visual sign that console display is cracked or other-
wise damaged. Replace Console if damaged.
replace the Console.
If the above steps do not resolve the problem, contact Cus-
tomer Service (if inside US/Canada) or your local distributor (if
outside US/Canada).
Be sure cable is connected securely to Console.
Be sure cables from handlebars and cable to Console are
secure and undamaged.
Be sure hands are centered on HR sensors. Hands must be
kept still with relatively equal pressure applied to each side.
A conductive electrode cream (heart rate cream) can help
make better conduct. These are available on the web or at
If tests reveal no other issues, Static Handlebar should be
replaced.
Strap should be "POLAR
" compatible and uncoded. Make
®
sure strap is directly against skin and contact area is wet.
If strap has replaceable batteries, install new batteries.
the WIRELESS HR setting and make sure that the current
value is set to ON.
Try moving unit away from sources of interference (TV, Micro-
wave, etc).
If interference is eliminated and HR does not function, replace
strap.
If HR still does not function, replace Console.
Make sure that the HR receiver is not blocked by a personal
electronic device in the left side of the media tray.
Solution
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E628

Table of Contents