First System Start-Up; Set Up Date, Time And Language; Select Channel And Region; Connecting To A Wireless Network - Lanberg 4–CHANNEL ICS–0404–0020 User Manual

F. FIRST SYSTEM START–UP
After the system loading procedure is complete, the "Setup Wizard"
window will appear on the screen, this will allow you to configure all
the basic recorder functions and prepare it for operation.

1. Set up date, time and language

In this window, select the desired time zone, current date and time. If
the recorder will be connected to the network, you can allow automat-
ic date and time synchronization via the Internet.
You can change the default date format and select the correct record-
er language.
Selecting "Enable" for "Setup Wizard" will launch the wizard the next
time the system starts.

2. Select channel and region

Select the WIFI channel and region you are interested in. After clicking
in the "Customize Channel" NVR will set the best channel for the cho-
sen region.
NOTE: DEPENDING ON THE COUNTRY, ONLY SPECIFIC WIFI BANDS
ARE AVAILABLE FOR PUBLIC USE, IN EUROPE YOU SHOULD ONLY
USE CHANNELS FROM THE EU REGION.

3. Connecting to a wireless network

Using this menu, you can configure the recorder connection to your
home WIFI network. To do this, select the network you are interest-
ed in from the list on the right, enter the correct password and click
confirm. If the details are filled correctly, the recorder will connect to
the network.
If you do not want to use the wireless network, uncheck the "Enable"
checkbox at the top of the current window.

4. Connection settings

The window is a preview of the recorder's network settings.
If the recorder is connected to a WiFi network, the currently assigned IP
address of the recorder, access details for remote connection, connec-
tion status, and a suggestion on what to do to solve any problems with
the connection will be displayed here.
If you have not connected the recorder to a WiFi network, and you
plan to connect it to the network via LAN cable, you should do it at
this point. After connecting the network cable, please wait about one
minute and press the "Diagnostics" button to test the connection.
NOTE: IF, DESPITE CORRECT COMPLETION OF THE ABOVE STEPS,
THE RECORDER HAS NOT CONNECTED TO THE NETWORK COR-
RECTLY, SKIP THIS STEP. DETAILED SETTINGS ABOUT NETWORK
CONNECTION YOU CAN FIND IN SECTION H.3.
8
Lanberg © 2015-2021 EN