Recording Settings; Network And Ip Settings - Lanberg 4–CHANNEL ICS–0404–0020 User Manual

2. Recording settings

A table showing the weekly recording schedule is displayed in
the window. The recorder allows you to select three conditions
that determine recording:
Time – if you select the red checkmark, the recorder will always
record in the specified hour range for the given day.
Motion – green checkmark is responsible for recording when
motion is detected (it will be necessary to configure motion
detection operation, see Section H.4.C).
Alarm – if this option is selected, the recorder will start recording
in case of receiving an alert (see Section H.1.D).

3. Network and IP settings

a. Network and IP
In this menu you can set all the necessary details related to the
recorder's connection to the Internet. It also allows you to pre-
view the cloud ID displayed in the right part of the window.
DHCP – allows you to enable or disable automatic downloading
of network from DHCP server settings by the recorder. The
following fields can only be edited with DHCP disabled.
IP address – current external IP address of the recorder.
Subnet Mask – information about the current subnet mask.
Gateway – the currently selected default gateway.
MAC address – mac address of the recorder.
Preferred DNS – the preferred DNS server.
Web Port – HTTP port (default value is 80).
MTU – Maximum Transmission Unit.
Throughput – current throughput of the network to which the recorder is connected.
Status – information about the current status of the Internet connection.
b. DDNS
In this menu you can set up an external DNS server for the
recorder, which allows you to connect remotely to the recorder
using a browser. The recommended DNS server provider is:
www.noip.com.
DDNS Provider – name of the DDNS server provider.
URL – server URL.
Login – server access login.
Password – server access password.
Test – allows you to test the connection.
BECAUSE REMOTE ACCESS IS BASED ON THE FLASH PRO-
TOCOL, FROM 2021 IT CAN BE USED ONLY VIA THE INTER-
NET EXPLORER.
c. E–mail
This menu allows you to configure the reports sent from the
recorder by email.
SMTP provider – mail server provider, can be selected from the
list. If your provider is missing, the more options button will allow
you to configure the server settings precisely.
Sender – how the recorder will be named in emails.
Password – a password to access the mail server.
EN Lanberg © 2015-2021
11