Lanberg 4–CHANNEL ICS–0404–0020 User Manual page 6

2. Arrange the drive in the designated space in the case. Then, holding the disk with your hand, turn the recorder
over. Align the HDD mounting holes with the holes on the recorder and then screw the HDD in place using
the screws provided.
3. Connect the SATA cables to the respective ports on the HDD, then close the case and fasten the screws.
NOTE: THE DISKS MUST BE FORMATTED AFTER BEING INSTALLED IN THE RECORDER. AFTER THE
RECORDER STARTS UP, A WINDOW WILL POP OUT ON HOW TO FORMAT THE DRIVE, PLEASE FOLLOW
THE INSTRUCTIONS ON THE SCREEN.
6
HDD
HDD
Lanberg © 2015-2021
SUB
HDMI USB USB DC 12V
AUDIO OUT VGA
MAIN
EN